O’Neil Balloonfusor

Please not that the O’Neil Balloonfusor is currently not available for sale. If you require more information, please contact us.

The O’Neil Balloonfusor is a non-electronic elastomeric infusion pump that is suitable for a broad range of applications. It can be used to provide intermittent or constant infusions by the Intravenous (IV)  or Subcutaneous (SC) route, at a fixed flow rate set by the manufacturer. It is a light weight and portable allowing its use in a variety of hospital, healthcare and outpatient settings, including being worn by the patient during ambulation. The device is suitable for the administration of various drugs e.g. antibodies, anticoagulants, analgesics, parenteral anaesthetics, cytotoxics, anti-emetics, muscle relaxants and others such as Ranitidine, Phenytoin, Digoxin, Desferrioxamine. The Balloonfusor is supplied sterile and is intended for single patient use.

Product History

Go Medical Industries has a history of developing medical devices for fluid delivery controlled by the use of non-electronic pumps and flow control tubing.  Initial R&D development work for the Balloonfusor was started in 1999 to develop a pump that would deliver greater volumes than currently available with the Go Medical Springfusor device (currently 10mL and 30mL). The Balloonfusor uses an elastomeric balloon to provide the driving force instead of a syringe such as in the Springfusor. As the elastomeric balloon is an integral part of the device, the Balloonfusor is supplied sterile and  is intended for single patient use.


  • For the provision of intermittent or continuous parenteral infusion up to 100mls in volume
  • The delivery of drugs via Intravenous (IV), Subcutaneous (SC) or Intramuscular (IM) infusions at a specified flow rate
  • Single use
  • For use in ambulatory or immobile patients, either within a healthcare setting or for patients at home


  • Infusion volumes / rates to be printed or stored in memory
  • Adjustable infusion rate settings and profiles required (e.g. dose titration)
  • Infusion accuracy greater than ±20% required (e.g. accurate infusion of a toxic drug)
  • Audio and visual alarm system required to alert clinicians of device failure
  • A “down pressure” sensor required to detect when the patient’s vein is blocked
  • A stored record of infusion volumes required
  • Multiple infusions required at the same time
  • Multiple use

Device Variants

Catalogue NumberFlow Rate (mL/hr)Size
SBI 100-2h 50 ml/hr 100 ml
SBI 100-4h 25 ml/hr 100 ml
SBI 100-6h 16.6 ml/hr 100 ml
SBI 100-12.5h 8.0 ml/hr 100 ml
SBI 100-20h 5.0 ml/hr 100 ml
SBI 100-25h 4.0 ml/hr 100 ml
SBI 100-40h 2.5 ml/hr 100 ml
SBI 100-100h 1.0 ml/hr 100 ml
SBI 100-168h 0.6 ml/hr 100 ml
SBI 100-200h 0.5 ml/hr 100 ml